Gigaset A670A Manual Download Page 38

Page: 38 / 71

Gigaset A670A (C530A) / LUG BE-NL en / A31008-M2512-M201-1-3F19 / answering_m.fm / 7/10/17

mplat

, V

ion 1

, 21.

012

Answer machine

The following options are available

during playback:

Stopping playback:

press

, press again to continue.

Or:

Press

Options

. Playback is stopped, to continue:

Continue

Go to the next message: press

Skip back 5 seconds (> 5 seconds) during message playback: press

Skip to the previous message:

Press

during the time stamp playback.

Go to the start of the current message:

Press

during the message playback.

Delete current message:

Delete

To delete all old messages:

Options

Delete old list

Yes

(Confirm prompt.)

Calling back a caller:

Options

Dial

To copy the number to the directory:

Options

Copy to Directory

Marking an old message as "new":

Options

Mark as new

More answer machine functions

Picking up the call during answer machine recording:

Press the Answer call key

Accept

Diverting a call to answer machine:

The answer machine is activated and the handset indicates an external call:

, the answer

machine starts immediately in

Answer & record

mode.

Two-way recording of external call: Options

Two-way Record

Ending two-way recording:

End

Tell the other party that the call is being recorded.

Changing the language for the voice prompt and default announcement

Language

Select language (flemisch/french/german/

english)

Select

(

= selected)

Operating when on the move (remote operation)

Check or activate the answer machine from another telephone (e.g. hotel, mobile phone).

Prerequisites:

The current system PIN is set to something other than 0000 (

page 31) and the

other telephone has tone dialling (DTMF). Alternatively, you can use a code transmitter
(available from retailers).

Note

If call screening has been activated on the handset and the call can already be heard on
the handset, then pressing the Answer call key

only activates/deactivates the hands-

free mode.

Summary of Contents for A670A








































































Search results

Summary of Contents for A670A

Reviews:

Related manuals for A670A

Brands by name

Popular brands

Gigaset A670A, Manual

Search results

Summary of Contents for A670A

Reviews:

Related manuals for A670A

Brands by name

Popular brands