Gigaset A670A Manual Download

Page: 31 / 71

Gigaset A670A (C530A) / LUG BE-NL en / A31008-M2512-M201-1-3F19 / settings.fm / 7/10/17

mplat

, V

ion 1

, 21.

012

Adjusting the telephone settings

Protection from anonymous callers (silenced)

You can set your phone so that it doesn't ring for anonymous calls (

page 20, callers who have

withheld Calling Line Identification). The call is only signalled on the display. The setting only
applies to handsets for which the setting is configured.

Audio Settings

Ringtones (Handset)

Anon.

Calls Silent

Change

(

= function activated)

Protection from anonymous callers (silenced or blocked)

Telephony

Anonymous Calls

Change

Protection Mode :

No Protection

: The protection mode is not active.

Or:

Silent Call

: Your telephone does not ring and the call is only shown on the display.

Or:

Block Call

: Your telephone does not ring and the call is not displayed. The caller hears the busy

tone.

Save

Blacklist

If the blacklist function is activated, calls from blacklisted numbers are either rejected or only
appear in the display.

Editing the blacklist

Telephony

Black List

Change

Blocked Numbers

New

Enter the number

Save

Or:

Delete

Delete the number

Save

Activating/deactivating the blacklist

Telephony

Black List

Change

Protection Mode:

No Protection

: The blacklist is not active.

Or:

Silent Call

: Your telephone does not ring and the call is only shown on the display.

Or:

Block Call

: Your telephone does not ring and the call is not displayed. The caller hears the busy

tone.

Save

Transferring numbers from a call list to the Black List

Open the call list.

Select entry (missed or accepted call).

Options

Copy to

Blacklist

Note

The setting will apply to all registered handsets.

Note

The setting will apply to all registered handsets and base.

Summary of Contents for A670A








































































Search results

Summary of Contents for A670A

Reviews:

Related manuals for A670A

Brands by name

Popular brands

Gigaset A670A, Manual

Search results

Summary of Contents for A670A

Reviews:

Related manuals for A670A

Brands by name

Popular brands