55
Making calls using select services
Gigaset A510IP / USA en / A31008-M2230-R301-2-6019 / netservices.fm / 09.10.2012
V
e
rsion 4, 16.0
9
.2005
Internal call divert is only single-stage i.e., if calls for the handset are diverted to a
different handset (e.g., MT1) on which a call divert is also active (e.g., to MT2), this
second call divert is not executed. The calls are signalled on handset MT1.
Activating/deactivating call waiting for external calls (VoIP)
If the function is activated, during an
external
call you will hear a call waiting tone
to signal that another external caller is trying to get through. If you have Caller ID,
the number of the waiting caller or the corresponding directory entry is shown in
the display. The caller will hear the ringing tone.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and you are the only party assigned to this connection.
Activating/deactivating call waiting
Prerequisite for calls via VoIP:
Parallel VoIP connections are permitted on your tel-
ephone (default setting; setting can be changed via the Web configurator).
§Menu§
¤
Ç
Select Services
¤
Call Waiting
r
Select
On
/
Off
to activate/deactivate call waiting.
¤
Press the display key
§Send§
.
Call waiting is activated/deactivated for all connections to the telephone and all
registered handsets.
Activating/deactivating call transfer – ECT (Explicit Call Transfer –
VoIP)
If the function is activated, you can connect two externalcallers on a VoIP connec-
tion with each other by pressing the end call key
a
. This assumes
that you are making an external call via one of your VoIP connections and start an
external consultation call.
You can activate/deactivate this function via your handset.
§Menu§
¤
Ç
Select Services
Transfer (ECT)
Select and press
§OK§
(
³
= on).
Please note
u
Any call for the handset that has been diverted is entered in the call lists.
u
If a call to a receive connection that is only assigned to the handset is
diverted to a handset that is not available (e.g., the handset is deactivated),
the call is rejected after a short time.
Please note
You can use the Web configurator to change further settings for the call transfer
on a VoIP connection
