Gigaset 5040 / en / A30350-M211-R201-5-5W19 / bigButton_en.fm / 01.03.2011
6
en
Adjusting the telephone
Changed telephone settings must be completed by
holding down the Set key
º
to make them available
permanently.
To
cancel
without saving, e.g. after an incorrect entry,
simply replace the handset if it is off the hook or pick it
up if it is on the hook. The original setting is then
retained.
Activating/deactivating the proximity
sensor
The proximity sensor recognises when someone
approaches the telephone and automatically activates
the display and key lighting.
*
Hold down the Proximity sensor key to acti-
vate/deactivate the function.
The display shows the
Œ
symbol when the proximity
sensor is activated.
Activating/deactivating automatic call pick-
up
An incoming call from a number stored under one of the
Name keys is automatically answered via the handsfree
function when someone approaches the telephone.
Prerequisite:
the proximity sensor is activated and the
number is stored correctly (including area code) under
the name key (see page 5).
Note:
An automatically answered call is ended like any
other call in handsfree mode (see page 4).
1
Hold down the Automatic call pick-up key
to activate/deactivate the function.
When the automatic call pick-up function is activated,
the symbol for the proximity sensor (
Œ
)
flashes
in the
display.
Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels
and can also be deactivated completely (default setting:
level 4). If the ringtone is deactivated, you can only rec-
ognise incoming calls from the display and the flashing
Calls list key.
To adjust when the telephone is idle:
º5
Hold down the Set key. Initiate function.
H
...
I
Adjust the volume with the Loud/Quiet key.
º
Hold down the Set key.
To adjust while the telephone is ringing:
Press
H
...
I
before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one of
three levels (default setting: level 3).
º6
Hold down the Set key. Initiate function.
1
...
3
Press one of the keys 1...3:
1
: lowest frequency;
3
: highest frequency.
º
Hold down the Set key.
Setting the ringtone
Ten different ringtones can be set for the ringer (default
setting: ringtone 9).
To set when the telephone is idle:
º7
Hold down the Set key. Initiate function.
0
...
9
Press one of the keys 0 ... 9.
º
Hold down the Set key.
To set while the telephone is ringing:
0
...
9
Press one of the keys 0 ... 9.
Setting the handset volume
The volume on the handset can be set to one of 3 levels
and saved (default setting: level 1).
Lift the handset and press
H
...
I
.
The last value set is saved.
