GH-PSU11-PD
Installation Guide
Product installation
( AMD K8 / AM2 )
Apply the thermal grease
evenly over the CPU surface.
Apply a generous amount of
thermal grease.
Step 1
Step 2
Clip the short end of the
mounting clip on the CPU
socket.
Push down on the cooler
until it is flush against the
CPU.
Step 3
Step 6
Plug the 4-pin connector
of the cooler into the
motherboard’s CPU fan
socket.
Step 4
Press the lever side of the
mounting clip untill it has
clipped in.
Check if the cooler is
mounted firmly.
Step 5
Product installation
(Intel LGA 1156 / 775)
Affix the LGA 1156 / 775
bracket to the MB with the
buckles included.
Step 1
Step 2
Step 2
Apply the thermal grease
evenly over the CPU surface.
Apply a generous amount of
thermal grease.
Clip the short end of the
mounting clip on the CPU
socket.
Step 3
Step 4
Push down on the cooler
until it is flush against the
CPU.
Press the lever side of the
mounting clip until it has
clipped in.
Step 5
Step 6
Check if the cooler is
mounted firmly.
Extra cooling fan installation
Insert the 4 fan rubber pad
mounts.
Step 1
Fit additional fan against
the rubber pad mounts
and pull to secure.
Note: 1. Fan size is 9cm
2. Make sure the air flow of both fans
are in the same direction.
Incorrect
Correct
Plug the 4-pin connector
of the cooler into the
motherboard’s CPU fan
socket.
Step 7
1.
Compatible with LGA 1156 / 775 & AMD K8 / AM2 CPU platforms.
2.
9cm smart PWM fan with max RPM up to 2800RPM.
3.
Special design enabling the mount of an additional fan.
4.
Highly conductive heat pipe providing extreme heat dissipation.
5.
Special aluminum fin design with large heat dissipation surface area.
6.
Direct contact of CPU against heat pipes for efficient heat transfer.
7.
Hassle free installation.
Features
Cooler dimensions:
96x78x122 mm
Fan dimensions:
92x92x25 mm
Heat pipe count:
3
Heat sink material:
Aluminum
Input voltage:
12V
Input current:
0.23Amp
Fan speed:
2800 RPM
Noise:
32dBA at full speed
Bearing type:
Rifle Bearing
Fan MTBF:
40,000hr
Specifications
Support list
The following is not covered by warranty:
1.
Incorrect usage or in a manner other than the designed purpose.
2.
Nonobservance of its proper operation. ( e.g. over-clocking )
3.
Malfunction due to interference from other devices.
4.
Unauthorized modification of the product.
5.
Malfunction due to unfit specifications on applied Motherboard.
6.
Malfunction arising from natural disasters ( earthquake, thunder, fire and flood ).
7.
Romoval of or damaged warranty label.
8.
The devices inside, including power supply, hard disk, CD-ROM drive, motherboard, cooler, etc,
are not detached from the chassis prior to the transportation, resulting in damage to the
cooler or computer-related devices.
9.
Any damage caused by nonobservance of the installation instruction contained in this manual.
CAUTION
The cooler fan speed levels provided are for reference use only.
Please refer to the motherboard BIOS to verify actual fan speed levels.
Intel® Core
TM
i5 / i3
Processor Series
Intel® Core
TM
2 Extreme Processor Series
Intel® Core
TM
2 Quad Processor Series
Intel® Core
TM
2 Duo Processor Series
Intel® Pentium® Extreme Edition Series
Intel® Pentium® D Processor Series
Intel® Pentium® 4 Processor Series
(LGA775)
AMD AM2
AMD Athlon
TM
FX Series
AMD Athlon
TM
64x2 Series
AMD Athlon
TM
64 Series
AMD Sempron Series
Accessory
Thermal Grease
LGA 1156 Bracket
LGA 775 Bracket
Fan Mounting Rubber Pad
