- 88 -
BIOS Setup
5-3-5 FCH Common Options
Parameter
Description
FCH Common Options
SATA Configuration Options
Press [Enter] for configuration of advanced items.
SATA Enable
– Enable/Disable OnChip SATA controller.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
AC Power Loss Options
Press [Enter] for configuration of advanced items.
AC Loss Control
– Selects the AC Loss Control Method.
– Options available: Power Off, Power On, Last State. Default setting
is
Last State
.
FCH RAS Options
Press [Enter] for configuration of advanced items.
ALink RAS Support
– Enable/Disable the ALink RAS Support.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto
.
Reset after sync flood
–
Enable/Disable AB to forward downstream sync-flood message to
system controller.
– Options available: Auto, Enable, Disable. Default setting is
Auto
.
Summary of Contents for W771-Z00
