background image

- 104 -

BIOS Setup

5-7-1  Secure Boot 

The Secure Boot submenu is applicable when your device is installed the Windows

®

 8 (or above) operating 

system.

 

 

(Note)  Advanced items prompt when this item is set to 

Custom

.

Parameter

Description

System Mode

Displays if the system is in User mode or Setup mode.

Secure Boot

Enable/ Disable the Secure Boot function.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

Secure Boot Mode

(Note)

Secure Boot requires all the applications that are running during the 

booting process to be pre-signed with valid digital certificates. This way, 
the system knows all files being loaded before Windows loads to the login 

screen have not been tampered with.
When set to Standard, it will automatically load the Secure Boot keys 
form the BIOS databases.
When set to Custom, you can customize the Secure Boot settings and 
manually load its keys from the BIOS database.
Options available: Standard, Custom. Default setting is 

Standard

.

Restore Factory Keys

Forces the system to user mode and installs factory default Secure Boot
key database.

Reset to Setup Mode

Press [Enter] to reset the system mode to Setup mode.

Summary of Contents for W771-Z00














































































































Reviews: