`
Advanced Memory Settings
&
Extreme Memory Profile (X.M.P.)
(Note)
, System Memory Multiplier, Memory Ref Clock,
Memory Odd Ratio (100/133 or 200/266), Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the
Advanced Frequency Settings
menu.
&
Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto
Lets the BIOS automatically configure this setting. (Default)
Normal
The BIOS automatically performs memory training. Please note that if the system
becomes unstable or unbootable, try to clear the CMOS values and reset the board
to default values. (Refer to the introductions of the battery/clear CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
Enable Fast Boot Skip memory detection and training in some specific criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.
&
Realtime Memory Timing
Allows you to fine-tune memory timings after the BIOS stage. (Default: Auto)
&
Memory Enhancement Settings
Provides several memory performance enhancement settings: Normal (basic performance), Relax OC,
Enhanced Stability, and Enhanced Performance. (Default: Auto)
&
Memory Channel Detection Message
Allows you to determine whether to show an alert message when the memory is not installed in the optimal
memory channel. (Default: Enabled)
&
Profile DDR Voltage
When using a non-XMP memory module or
Extreme Memory Profile (X.M.P.)
is set to
Disabled
, the value
is displayed according to your memory specification. When
Extreme Memory Profile (X.M.P.)
is set to
Profile1
or
Profile2
, the value is displayed according to the SPD data on the XMP memory.
&
Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
&
Channel Interleaving
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability.
Auto
lets the BIOS
automatically configure this setting. (Default: Auto)
&
Rank Interleaving
Enables or disables memory rank interleaving.
Enabled
allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability.
Auto
lets the BIOS automatically
configure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU and a memory module that support this feature.
Memory Channels Timings
d
Channels Standard Timing Control, Channels Advanced Timing Control, Channels
Misc Timing Control
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
- 31 -
Summary of Contents for W480 VISION W
Page 58: ... 58 ...
Page 59: ... 59 ...
