Gigabyte S472-Z30, User Manual

Page: 68 / 138

- 68 -
BIOS Setup
5-2-10 Network Stack Configuration
(Note) This item appears when Network Stack is set to Enabled .
Parameter
Description
Network Stack
Enable/Disable the UEFI network stack.
Options available: Enabled, Disabled. Default setting is
Enabled .
Ipv4 PXE Support
(Note)
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled, Disabled. Default setting is
Enabled .
Ipv4 HTTP Support
(Note)
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled, Disabled. Default setting is
Disabled .
Ipv6 PXE Support
(Note)
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled, Disabled. Default setting is
Enabled .
Ipv6 HTTP Support (Note)
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled, Disabled. Default setting is
Disabled .
PXE boot wait time
(Note)
Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.
Media detect count
(Note)
Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.