- 27 -
Western Digital NIC Configuration
•
Core Dumps in Flash
•
Power-on Selftest (POST) Failure
• PCIe Link is up, not configured correctly
•
Additional “attention” state where the user should access Fuji’s Management Interface for status
4-3-2 Reset EMP LED
The secondary Ethernet Management Port (EMP) and reset state are represented on a dual LED in the same
package. The reset function employs the green LED and the EMP employs the red LED. Combined they
appear to the user as amber.
LED: H
Description
Controlled by
Off
Board is off or in held in reset
Green
Board is out of reset and there is no EMP activity
HW
Blink
Green/yellow blink: EMP is active
EMP
