manualshive.com logo in svg

Gigabyte S252-ZC0, User Manual, Page: 116 / 134

Share
Download
Gigabyte S252-ZC0 User Manual Download Page 116

BIOS Setup

- 116 -

5-4  AMD PBS Menu

AMD PBS Option menu displays submenu options for configuring the function of AMD PBS. Select a 
submenu item, then press [Enter] to access the related submenu screen.

Parameter

Description

RAS

Press [Enter] for configuration of advanced items.

SPI Locking

Enable/Disable SPI Locking for protect ROM part.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

iLA TraceMemoryEn

Reserved 1M bytes MMIO space on 1M boundary when iLA TraceMemoryEn 
enabled.
Options available: Enabled/Disabled. Default setting is 

Disabled

.

iLA TraceMemoryEn 
reserved MMIO

Reserved function.

SRIS mode debug

Control SRIS mode debug.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

SRIS Autodetect

Control SRIS Autodetect.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

Summary of Contents for S252-ZC0







































































































































Reviews:

No comments