S12-P10R/S12-P04R/S12-P04S
Slide Rails and Rack Installation Instructions
w
After withdrawing the front section, push back the middle section into the slide rail assembly. Push the latch and push back the middle section into the
slide rail assembly.
u
Position the front section against the S12 server and make sure the mounting holes on the front section are
aligned with the locating pins on the side of the server. Assemble the front section onto the S12 series server
and pull back to lock on. (NOTE: Make sure the below fixed bracket is locked on.) Do the same for the other
slide.
u
Unpack the slide rail assembly.
Pull the slide rail assembly until
it reaches stop.
v
Push back the white latch on the front section of the slide rail assembly and simultaneously withdraw the front
section from the slide rail assembly.
1
Preparing the Slide
Rail Assembly
2
Installing the Front
Section of the Slide
Rail onto the S12
Series Server
Fixed bracket
Latch on the middle section
