Gigabyte R282-Z96, User Manual

Page: 135 / 143

- 135 - BIOS Setup
BR Init Mid end 0xA19E
BR Init Late entry 0xA19F
BR Init Late install protocol 0xA1A0
BR Init Late end 0xA1A1
BR DXE install complete protocol 0xA1A2
UNB install complete PPI 0xA1A3
UNB AfterApLaunch callback entry 0xA1A4
UNB AfterApLaunch callback end 0xA1A5
5-11-3 S3 Interface Post Code
Before the S3 save code calls out to allocate a buffer 0xA1EC
After the S3 save code calls out to allocate a buffer 0xA1ED
Before the memory S3 save code calls out to allocate a buffer 0xA1EE
After the memory S3 save code calls out to allocate a buffer 0xA1EF
Before the memory code calls out to locate a buffer 0xA1F0
After the memory code calls out to locate a buffer 0xA1F1
Before the memory code calls out to locate a buffer 0xA1F2
After the memory code calls out to locate a buffer 0xA1F3
Before the memory code calls out to locate a buffer 0xA1F4
After the memory code calls out to locate a buffer 0xA1F5
Before the memory code calls out to locate a buffer 0xA1F6
After the memory code calls out to locate a buffer 0xA1F7
5-11-4 PMU Post Code
Failed PMU training 0xA1F9
5-11-5 [0xA5XX] assigned for AGESA PSP Module
// PSP V1 Modules
PspPeiV1 entry 0xA501
PspPeiV1 exit 0xA502
MemoryDiscoveredPpiCallback entry 0xA503
MemoryDiscoveredPpiCallback exit 0xA504
PspDxeV1 entry 0xA507
PspDxeV1 exit 0xA508
PspDxeV1 PspPciEnumerationCompleteCallBack entry 0xA50A
PspDxeV1 PspPciEnumerationCompleteCallBack exit 0xA50B
PspDxeV1 ready to boot entry 0xA50C
PspDxeV1 ready to boot exit 0xA50D
PspSmmV1 entry 0xA50E
PspSmmV1 exit 0xA50F
PspSmmV1 SwSmiCallBack entry, build the S3 save area for
resume
0xA510