Gigabyte R282-G30 User Manual Download Page 12

Page: 12 / 109

Hardware Installation

- 12 -

1-2

Product Specifications

Soc

Socket

CPU

3rd Generation Intel® Xeon® Scalable Processors

Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon®
Silver Processor

10nm technology, CPU TDP up to 270W

NOTE: If only 1 CPU is installed, some PCIe or memory functions might be
unavailable

Soc

Socket

1 x LGA 4189

Socket P+

Soc

Socket

Chipset

Intel® C621A Express Chipset

Soc

Socket

Memory

32 x DIMM slots

DDR4 memory supported only

8-channel memory architecture per processor

RDIMM modules up to 128GB supported

LRDIMM modules up to 128GB supported

3DS RDIMM/LRDIMM modules up to 256GB supported

1.2V modules: 3200/2933/2666 MHz

Soc

Socket

LAN

2 x 1Gb/s LAN ports ( Intel® I350-AM2)

1 x 10/100/1000 management LAN

Soc

Socket

Video

Integrated in Aspeed® AST2600

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Soc

Socket

Storage

8 x 3.5" or 2.5" SATA/SAS hot-swappable HDD/SSD bays

4 x 3.5" or 2.5" SATA/SAS/Gen4 NVMe hot-swappable HDD/SSD bays

Soc

Socket

RAID

RAID Level depends on SAS Card

Soc

Socket

Expansion Slot

Riser Card CRS2014:

1 x PCIe x16 slot (Gen4 x16), FHFL

Riser Card CRS2026:

2 x PCIe x16 slot (Gen4 x16), FHFL

Riser Card CRS2026:

2 x PCIe x16 slot (Gen4 x16), FHFLL

1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0

Supported NCSI function

1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth from CPU_1

Supported NCSI function

NOTE:

We reserve the right to make any changes to the product specifications and product-related

information without prior notice.

Summary of Contents for R282-G30














































































































Search results

Summary of Contents for R282-G30

Reviews:

Gigabyte R282-G30, User Manual, Page: 12 / 109

Search results

Summary of Contents for R282-G30

Reviews: