Gigabyte R263-S30-AAC1 User Manual Download Page 81

Page: 81 / 114

- 81 -

BIOS Setup

5-3-3

UPI Configuration

Parameter

Description

UPI General Configuration

Press [Enter] to configure advanced items.

UPI Status

– Press [Enter] to view the Uncore status.

Link Frequency Select

– Selects the UPI link frequency.

– Options available: 12.8GT/s, 14.4GT/s, 16.0GT/s, Auto, Use Per Link

Setting. Default setting is

Auto

SNC

– Enable/Disable Sub NUMA Cluster function.

– Options available: Auto, Disable, Enable SNC2 (2-clusters), Enable

SNC4 (4-clusters). Default setting is

Auto

Stale AtoS

– Enable/Disable Stale A to S directory optimization.

– Options available: Disable, Enable, Auto. Default setting is

Auto

LLC dead line alloc

–

Enable/Disable fill dead lines in LLC.

– Options available: Disable, Enable, Auto. Default setting is

Enable

MMIO High Base

– Options available: 56T, 40T, 32T, 24T, 16T, 4T, 2T, 1T, 512G, 3584T.

Default setting is

32T

Summary of Contents for R263-S30-AAC1



















































































































Search results

Summary of Contents for R263-S30-AAC1

Reviews:

Gigabyte R263-S30-AAC1, User Manual, Page: 81 / 114

Search results

Summary of Contents for R263-S30-AAC1

Reviews: