manualshive.com logo in svg

Gigabyte R263-S30-AAC1, User Manual, Page: 63 / 114

Share
Download
Gigabyte R263-S30-AAC1 User Manual Download Page 63

- 63 -

BIOS Setup

5-2-4  PCI Subsystem Settings

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

OCP# I/O ROM

(Note1)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

OCP# Lanes

(Note1)

Change the PCIe lanes. Default setting is 

Auto

.

OCP# Max Link Speed

(Note1)

Configure PCIe max link speed.

Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5. 
Default setting is 

Auto

.

SLOT# I/O ROM

(Note2)

When enabled, this setting will initialize the device expansion 
ROM for the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

SLOT# Lanes

(Note2)

Change the PCIe lanes. Default setting is 

Auto

.

SLOT# Max Link Speed

(Note2)

Configure PCIe max link speed.

Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5. 
Default setting is 

Auto

.

(Note1)  This section is dependent on the available OCP Slot.
(Note2)  This section is dependent on the available PCIe Slot.

Summary of Contents for R263-S30-AAC1



















































































































Reviews:

No comments