Gigabyte R182-34A, User Manual

Page: 79 / 102

- 79 - BIOS Setup
5-3-7 PCH Configuration
Parameter
Description
PCH Configuration
PCH SATA Configuration
Press [Enter] to configure advanced items.
Š
SATA Controller
– Enable/Disable SATA controller.
– Options available: Enable, Disable. Default setting is Enable .
Š
Configure SATA as
– Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is AHCI .
Š
Alternate Device ID on RAID
(Note 1)
– Enable/Disable Alternate Device ID on RAID mode.
– Options available: Enable, Disable. Default setting is Disable
.
Š
SATA Port 0/1/2/3/4/5/6/7
– The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
(Note 1) Only appears when HDD sets to RAID Mode.