Gigabyte Q1000 Series, User Manual, Page: 25 / 109

English
14
2.8 WWAN 3G Connection
The Q1000, depending on configuration, features a WWAN 3G
Connection. This section will briefly explain how to install and set up
the WWAN 3G unit if it did not ship with your notebook.
If you purchased GIGABYTE WWAN 3G Module separately you
should have these items in the package:
● WWAN 3G Mobile Broadband Card
● Driver CD
● Quick Start Guide
To install the 3.5G Mini Card please follow these steps, however
if you are not comfortable doing so, please contact the supplier
to install the Module for you. Ensure the Q1000 is off before
proceeding:
1. Shut down the power.
2. Remove the compartment cover to reveal the mini card slots.
There should be one open slot available.
3. Line up the 3.5G mini card with the slot, making sure to check
the alignment of the notch, and press the card into the slot.
4. There should be an antenna plug available to plug into the mini
card to allow for signal reception and transmission - Plug this into
the port on the card. Follow the software installation steps on the
page.
5. The SIM card slot is under the battery in the battery bay.