manualshive.com logo in svg

Gigabyte H262-NO0, User Manual, Page: 94 / 113

Share
Download
Gigabyte H262-NO0 User Manual Download Page 94

BIOS Setup

- 94 -

5-3-10 

Runtime Error Logging Settings

Parameter

Description

Runtime Error Logging

System Errors

Enable/Disable system error logging function.
Options available: Enable, Disable. Default setting is 

Enable

.

S/W Error Injection Support

Enable/Disable software injection error logging function.
Options available: Enable, Disable. Default setting is 

Disable

.

Whea Settings

Press [Enter] to configure advanced items.

 

Š

WHEA (Windows Hardware Error Architecture) Support

 

– Enable/Disable WHEA Support.

 

– Options available: Enable, Disable. Default setting is 

Enable

.

Memory Error Enabling

Press [Enter] to configure advanced items.

 

Š

Memory Error

 

– Enable/Disable Memory Error.

 

– Options available: Enable, Disable. Default setting is 

Enable

.

 

Š

Memory Corrected Error

 

– Enable/Disable Memory Corrected Error.

 

– Options available: Enable, Disable. Default setting is 

Enable

.

 

Š

Uncorrected Error disable Memory

 

– Enable/Disable the Memory that triggers Uncorrected Error.

 

– Options available: Enable, Disable. Default setting is 

Disable

.

Summary of Contents for H262-NO0


















































































































Reviews:

No comments