Gigabyte H242-Z10 User Manual Download Page 105

Page: 105 / 139

- 105 -

BIOS Setup

5-6 Server Management Menu

(Note) Advanced items prompt when

OS Watchdog Timer

is set to

Enabled

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is

Disabled

FRB-2 Timer
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is

minutes

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is

Do Nothing

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is

Disabled

OS Wtd Timer
Timeout

(Note)

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is

minutes

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

OS Wtd Timer
Policy

(Note)

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is

Reset

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

Summary of Contents for H242-Z10












































































































































Search results

Summary of Contents for H242-Z10

Reviews:

Gigabyte H242-Z10, User Manual, Page: 105 / 139

Search results

Summary of Contents for H242-Z10

Reviews: