- 10 -
English
GV-RX165T256D-RH Graphics Accelerator
(Note) Only Windows
®
XP operating system supports CrossFire
TM
mode. Please do not enable
CrossFire
TM
in Windows
®
2000.
How to enable the ATI Native
CrossFire
TM
technology
(Note 1)
:
Step 1:
Install two CrossFire
TM
graphics cards of the same chipset on a CrossFire
TM
-supported motherboard and
connect the graphics cards via two CrossFire
TM
bridge interconnect cables (Figure 1). Then users can
enable the CrossFire
TM
technology simply through the graphics card driver.
Step 2:
After installing graphics card driver in operating system, access the ATI CATALYST Control Center
(please refer to Page 22). From the ATI CATALYST Control Center, enter the CrossFire
TM
menu and
assure to select the
Enable CrossFire
checkbox (Figure 2).
Step 3:
When the next confirmation dialog box appears (Figure 3), click
Yes
to complete the CrossFire
TM
configurations.
Figure 2
Figure 3
Two CrossFire
TM
graphics cards of the same type.
(Example: GV-RX165T256D-RH)
Two CrossFire
TM
bridge
interconnect cables.
Figure 1