background image

 

 

Eng
lis

   

 

Caution 

1.  Before refilling the tank with coolant for testing the Liquid cooling system, please make sure again that all water 

tube joints are securely fitted and the clips are correctively positioned. 

2.  While removing water tubes for uninstallation, be sure to keep the device for removal of these tubes away from 

any electronic part. 

 

The following are not covered by the warranty: 

1.  Use the product incorrectly or in a manner other than the designed purpose. 
2.  Nonobservance of the proper operation provided. (e.g. over-clocking) 

3.  Malfunction due to interference from other devices. 
4.  Unapproved modification of the product. 

5.  Consequential damage to other objects due to the product’s fault. 

6.  Malfunction arising from casualties (earthquake, thunder, fire, and flood). 
7.  The product’s warranty label has been removed or damaged. 

8.  The devices inside, including power supply, hard disk, CD-ROM drive, motherboard, ventilator, etc, are not 

detached from the casing prior to the transportation of the computer product, resulting in damage to the casing 

or computer-related devices. 

9.  Any lose due caused by failure to follow the installation process contained in the user. 

10.  Any damage to the system arising from leakage of coolant due to improper installation is not covered by the 

warranty. 

11.  Use only Gigabyte Liquid Coolant. Any damage arising from the use of liquids other than Gigabyte Liquid 

Coolant is not covered by the warranty. 

 

Summary of Contents for GH-WPBV1













Reviews: