Gigabyte GD-2018BP, User Manual

Page: 6 / 12

5
ENGLISH
Installation Instructions
Installing the Display
1. Place the display onto the base.
Packaging Procedures
If you need to package the display, please unplug the display panel from the base before placing
them into a box. The procedures are as follows:
1. Unplug the power cord from the display (make sure all attached peripherals are already turned
off).
2. Push forward the four latches inside the base and hold the latches.
3. Unplug the display panel from the base and then put them into an outer box.
Important
Before you start, place a clean tower or cloth on a flat surface so that you can lay the display panel
on a clean flat place without being damaged. Slightly lift the display when unplugging it from the
base.
Adjusting the Viewing Angle
You may adjust the display’s viewing angle from –5
°
to 20
°
.
2. Align the display with the swivel on the
base and plug the display into the base.