&
Administrator Password
Allows you to configure an administrator password. Press <Enter> on this item, type the password, and
then press <Enter>. You will be requested to confirm the password. Type the password again and press
<Enter>. You must enter the administrator password (or user password) at system startup and when entering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
&
User Password
Allows you to configure a user password. Press <Enter> on this item, type the password, and then press
<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.
You must enter the administrator password (or user password) at system startup and when entering BIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one first. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to confirm.
`
Secure Boot menu
&
System Mode
Displays the current system mode.
&
Secure Boot
Displays the current secure boot state.
&
Secure Boot
Enables or disables the secure boot function. Secure Boot requires all the applications that are running
during the booting process to be pre-signed with valid digital certificates. This way, the system knows all
the files being loaded before Windows loads and gets to the login screen have not been tampered with.
(Default: Disabled)
&
Secure Boot Mode
Allows you to configure the secure boot mode. (Default: Custom)
`
Key Management
This section provides you with configuration options for secure boot key management.
2-5 Security
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Main
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the Administrator's password is set,
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum
length
3
Maximum
length
20
Administrator Password
User Password
`
Secure Boot menu
gf
: Select Screen
hi
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Boot
Save & Exit
Security
Chipset
Advanced
- 31 -
