Gigabyte GA-F2A88X-D3HP, User Manual

Page: 19 / 96

- 19 - Hardware Installation
1-6 Setup of the AMD Dual Graphics Coniguration
Combining the onboard GPU with a discrete graphics card, AMD's Dual Graphics technology can provide
signiicantly advanced display performance for AMD platform. Read the following instructions on coniguring a
Dual Graphics system.
A. System Requirements
- AMD A series processor
-
Windows 8.1/7 operating system
- An AMD Dual Graphics technology-supported motherboard and correct driver
-
A graphics card that supports AMD Dual Graphics technology (for more details, please visit AMD's oficial
website) and correct driver
B. Installing the Graphics Cards and Coniguring BIOS Setup
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install an AMD Dual Graphics technology-supported
graphics card on the PCIEX16 slot. Plug the monitor cable into the graphics card and start up your computer.
Step 2:
Enter BIOS Setup to set the following items under the
Peripherals\GFX Con
i
guration menu:
- Set Integrated Graphics to Force .
- Set UMA Frame Buffer Size to 512M or above.
Save the settings and exit BIOS Setup. Restart your computer.
C. Coniguring the Graphics Card Driver
After installing the graphics card driver in the operating system, go to the
AMD VISION Engine Control Center . Browse to Performance\AMD
Radeon ™ Dual Graphics and ensure the Enable AMD Radeon Dual
Graphics check box is selected.
(Note) Make sure the drivers for the Chipset, onboard graphics, and external graphics card are properly
installed.
Procedure and driver screen for enabling the AMD Dual Graphics technology may differ by graphics
card and driver version. Refer to the manual that came with your graphics card for more information.