Gigabyte GA-990FXA-UD7, User Manual, Page: 61 / 112

- 61 - Configuring SATA Hard Drive(s)
Step 5:
Usable hard drives are listed on the
Logical Drive Create Menu . Use the up or down arrow key to select the
hard drive to be included in the array and press the <Space> key. The selected hard drives will be marked with
[X] . Then move to Basic Setting and press <Enter>.
Step 6:
Use the up or down arrow key to move to and configure each required item in sequence.
After completing, press <Enter> on Start To Create (Figure 7). When the message "Are You Sure To Create
Logical Drive?" appears, press <Enter> to begin creating the RAID array or <Esc> to cancel.
When completed, a message which says "Successful To Create Logical Drive" will appear. Press <Enter> to
complete. Press <F10> to exit the RAID setup utility.
Figure 6
Figure 7
RAID Utility (C) 2012 Advanced Micro Devices, Inc. [Rev. 1.0.0.45]
F10=Exit Utility
hi
=Move Highlight <Space>=Toggle Checkbox Esc=Previous Page
+ Logical Drive Create Menu
+ Usable Physical Drive List
- Hitachi HDT721032SLA360
| 500.10 GB [X]
- Hitachi HDT721032SLA360 | 500.10 GB [X]
+ Basic Setting
Usable Physical Disk On
(Port : 4, TargetId : 1)
RAID Utility (C) 2012 Advanced Micro Devices, Inc. [Rev. 1.0.0.45]
F10=Exit Utility
hi
=Move Highlight <Enter>=Select Option Esc=Previous Page
+ Logical Drive Create Menu
- Raid Mode : <RAID 0>
- Stripe Block (KB) : <64>
- Setcor Size (Bytes) : <512>
- Initialization : <Fast>
- Gigabyte Boundary : <Enable>
- Read Policy : <Read Ahead>
- Write Policy : <Write Back>
- Ld Name : GBT
+ Ld Size Setting
- Ld Max Size : 1000.21 GB
- Ld Size (GB) : [0]
+ Start To Create