Gigabyte G482-Z54 User Manual Download Page 122

Page: 122 / 158

BIOS Setup

- 122 -

5-6 Server Management Menu

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is

Enabled

FRB-2 Timer
timeout

Configures the FRB2 Timer timeout.

Options available: 3 minutes, 4 minutes, 5 minutes, 6 minutes. Default setting is

minutes

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configures the FRB2 Timer policy.

Options available: Do Nothing, Reset, Power Down. Default setting is

Do Nothing

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is

Disabled

OS Wtd Timer
Timeout

Configures OS Watchdog Timer.

Options available: 5 minutes, 10 minutes, 15 minutes, 20 minutes. Default setting is

10 minutes

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

OS Wtd Timer
Policy

Configure OS Watchdog Timer Policy.

Options available: Reset, Do Nothing, Power Down. Default setting is

Reset

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

Summary of Contents for G482-Z54































































































































































Search results

Summary of Contents for G482-Z54

Reviews:

Brands by name

Popular brands

Gigabyte G482-Z54, User Manual

Search results

Summary of Contents for G482-Z54

Reviews:

Brands by name

Popular brands