manualshive.com logo in svg

Gigabyte G262-ZL0, User Manual

Share
Download
Gigabyte G262-ZL0 User Manual Download Page 67

- 67 -

BIOS Setup

5-2-9 

USB Configuration

Parameter

Description

USB Configuration

USB Module Version

Displays the USB version.

USB Controllers

Displays the supported USB controllers.

USB Devices

Displays the USB devices connected to the system.

Legacy USB Support

Enable/disable the Legacy USB support fuction. AUTO option disables 
legacy support if no USB devices are connected. DISABLE option will 
keep USB devices available only for EFI applications.
Options available: Auto/Enabled/Disabled. Default setting is 

Enabled

.

XHCI Hand-off

Enable/Disable the XHCI (USB 3.0) Hand-off support. 
Options available: Enabled/Disabled. Default setting is 

Enabled

.

USB Mass Storage Driver 
Support

(Note)

Enable/Disable the USB Mass Storage Driver Support.
Options available: Enabled/Disabled. Default setting is 

Enabled

.

USB hardware delays and 
time-outs

USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.
Options available: 1 sec/5 sec/10 sec/20 sec. Default setting is 

20 sec

.

USB resetr time-out

Options available: 1 sec/5 sec/10 sec/20 sec. Default setting is 

20 sec

.

(Note)  This item is present only if you attach USB devices.

Summary of Contents for G262-ZL0














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands