manualshive.com logo in svg

Gigabyte G182-C20, User Manual

Share
Download
Gigabyte G182-C20 User Manual Download Page 56

BIOS Setup

- 56 -

5-2-7  PCI Subsystem Settings

Parameter

Description

PCI Bus Driver Version

Displays the PCI Bus Driver version information.

SATA Hot Plug

Enable/Disable SATA Hot Plug.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

NVMe RAID mode

Enable/Disable NVMe RAID mode.
Options available: Enabled, Disabled. Default setting is 

Disabled

.

SL_SAS_1/2 Control

Change the SL_SAS function.
Options available: Disabled, SATA, PCIe x4. Default setting is 

PCIe x4

.

PCIE_#

(Note1) 

Change the PCIe lanes.
Options available: Disabled, Enabled, x4x4, x8x8, x8x4x4, x4x4x8, 
x4x4x4x4. Default setting is 

Enabled

.

PCIE_# I/O ROM 

(Note1)

When enabled, this setting will initialize the device expansion ROM for 
the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Onboard LAN Controller

(Note2)

Enable/Disable the onboard LAN controller.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

Onboard LAN1/2 I/O ROM

(Note2) 

Enable/Disable the onboard LAN devices, and initializes device 
expansion ROM.
Options available: Enabled, Disabled. Default setting is 

Enabled

.

(Note1)   This section is dependent on the available PCIe Slot.
(Note2)   This section is dependent on the available LAN controller.

Summary of Contents for G182-C20













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands