R-17-01-081021
6BXDS
USER'S MANUAL
1. System power on by PS/2 Mouse: First, enable this function
in CMOS Setup, then you can power on the system by double
clicking the right or left button of your PS/2 Mouse.
2. System power on by Keyboard: If your ATX power supply
supports larger than 100~300 mA 5V Stand-By current(rest
with keyboard require), you can power on your system by
entering password from the Keyboard after setting the
“Keyboard power on” jumper (JP1) and password in CMOS
Setup.
3. Modem Ring-On on COM B.
4. Wake-up on LAN supports(on JP8
): Y
our ATX power supply
must support larger than 720 mA 5V Stand-By current.
5. Support 3 steps ACPI LED.
6. Support LDCM
Pentium
II / Processor MAINBOARD