Operation
Manual 20791, Rev. C, June 2001
2-33
[
DISPLAY SETUP]
Menu F3):
Define the color of the various elements of the display, which labels should be displayed,
and titles for the display and the entry channel (see Figure 2-7).
When the sub-menus associated with the COLOR and LABELS softkeys are accessed, the display
will show the current state of the color or label of interest in light blue. The other color or label des-
ignations will be displayed in standard menu green.
When [
DISPLAY SETUP
] is pressed, the softkey menu will change to F3-12.
[
COLOR]
Menu F3-12:
Define the color of the entry channel trace with its summary information, the
color of the graticule, and the intensity of the colors. When this softkey is pressed the softkey
menu will change to F3-13.
[CHANNEL COLOR]
Menu F3-13:
Choose the color of the entry channel trace and its summary information. When
this softkey is pressed, the softkey menu will change to F3-14.
When one of the color softkeys shown in menu F3-14 is pressed, the color of the entry channel
trace and its summary information will change to the color indicated by the softkey label.
[GRAT COLOR]
Menu F3-13:
Choose the color of the display graticule. When this softkey is pressed, the soft-
key menu will change to F3-15.
When one of the graticule color softkeys shown in menu F3-15 is pressed, the color of the grat-
icule will change to the color indicated by the softkey label.
This softkey choose the intensity of each basic color for both the channel data and the grati-
cule.
When the [
COLOR INTENST
] softkey is pressed, the softkey menu will change to F3-16.
When either the RED DIM/BRT, GREEN DIM/BRT or BLUE DIM/BRT softkeys of menu
F3-16 are pressed, the indicated color will dim or brighten everywhere except for the graticule.
When either the GRT RED DIM/BRT, GRT GRN DIM/BRT or GRT BLU DIM/BRT softkeys
of menu F3-16 are pressed, the indicated color will dim or brighten for just the graticule.
[
LABELS]
Menu F3-12:
Specify which labels should be displayed. When this softkey is pressed, the soft-
key menu will change to F3-17.
Summary of Contents for 8003
