GIGA-BYTE TECHNOLOGY R281-3C0 User Manual Download Page 60

Page: 60 / 121

BIOS Setup

- 60 -

5-2-8 Network Stack

Network stack

Enable/Disable the UEFI network stack.

Options available: Enabled/DIsabled. Default setting is

Enabled

Ipv4 PXE Support

(Note)

Enable/Disable the Ipv4 PXE feature.

Options available: Enabled/DIsabled. Default setting is

Enabled

Ipv4 HTTP Support

(Note)

Enable/Disable the Ipv4 HTTP feature.

Options available: Enabled/DIsabled. Default setting is

Disabled

Ipv6 PXE Support

(Note)

Enable/Disable the Ipv6 PXE feature.

Options available: Enabled/DIsabled. Default setting is

Disabled

Ipv6 HTTP Support

(Note)

Enable/Disable the Ipv6 HTTP feature.

Options available: Enabled/DIsabled. Default setting is

Disabled

PXE boot wait time

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

Media detect count

(Note)

Press the <+> / <-> keys to increase or decrease the desired values.

(Note) This item appears when

Network Stack

is set to

Enabled

Summary of Contents for R281-3C0


























































































































Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R281-3C0, User Manual

Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands