manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Share
Download
GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 82

BIOS Setup

- 82 -

5-3-5-1 Intel® VT for Directed I/O (VT-d) 

  Intel® VT for Directed I/O (VT-d) 
  Intel® VT for Directed I/O (VT-d)  

 

Enable/Disable the Intel VT for Directed I/O (VT-d) support function by reporting the I/O device 
assignment to VMM through DMAR ACPI Tables. 

 

Options available: Enable/Disable. Default setting is 

Enable

.

  ACS Control  

 

Enable: Programs ACS only to Chipset Pcie Root Ports Bridges.

 

Disable: Programs ACS to all PCIe bridges.

 

Default setting is 

Enable

.

  Interrupt Remapping  

 

Enable/Disable the interrupt remapping support function. 

 

Options available: Enable/Disable. Default setting is 

Enable

.

  PassThrough DMA

 

Enable/Disable the Non-Isoch VT_D Engine PassThrough DMA support function.

 

Options available: Enable/Disable. Default setting is 

Enable

.

 ATS

 

Enable/Disable Non-Isoch VT_D Engine ATS support.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Posted Interrupt 

 

Enable/Disable VT_D posted interrupt.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Coherency Suuport (Non-Isoch)

 

Enable/Disable Non-Isoch VT_D Engine Coherency support.

 

Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for R281-2O0





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands