manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Share
Download
GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 77

- 77 -

BIOS Setup

5-3-4  Memory Configuration

  Integrated Memory Controller (iMC)
  Enforce POR

 

When set to Enable, the system enforces Plan Of Record restrictions for DDR4 frequency and voltage 
programming. When set to Auto, the system sets it to the MRC default settings.

 

Options available: Auto/POR/Disable. Default setting is 

Enable

.

  Memory Frequency

 

Configures the memory frequency.

 

Options available: Auto/2133/2400/2666. Default setting is 

Auto

.

  Enable ADR

 

Enables the detecting and enabling of ADR.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Legacy ADR Mode

 

Enable/Disable the Legacy ADR Mode.

 

Options available: Enable/Disable. Default setting is 

Disable

.

  ADR Data Save Mode

 

Data Save Mode for ADR, Batterybacked or Type 01 NVDIMM.

 

Options available: Disable/Batterybacked DIMMs/NVDIMMs. Default setting is 

NVDIMMs

.

  Erase-ARM NVDIMMs

 

Enable/Disable Erasing and Arming NVDIMMs.

 

Options available: Enable/Disable. Default setting is 

Enable

.

  Restore NVDIMMs

 

Enable/Disable Automatic restoring of NVDIMMs.

 

Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for R281-2O0





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands