GIGA-BYTE TECHNOLOGY R281-2O0 Service Manual Download Page 104

Page: 104 / 124

BIOS Setup

- 104 -

5-4-1 System Event Log

Enabling/Disabling Options
SEL Components

Change this item to enable or disable all features of System Event Logging during boot.

Options available: Enabled/Disabled. Default setting is

Enabled

Erasing Settings
Erasing SEL

Choose options for erasing SEL.

Options available: No/Yes, On next reset/Yes, On every reset. Default setting is

When SEL is Full

Choose options for reactions to a full SEL.

Options available: Do Nothing/Erase Immediately. Default setting is

Do Nothing

Custom EFI Logging Options
Log EFI Status Codes

Enable/Disable the logging of EFI Status Codes (if not already converted to legacy).

Options available: Disabled/Both/Error code/Progress code. Default setting is

Error code

Summary of Contents for R281-2O0





























































































































Search results

Summary of Contents for R281-2O0

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R281-2O0, Service Manual

Search results

Summary of Contents for R281-2O0

Reviews:

Brands by name

Popular brands