GIGA-BYTE TECHNOLOGY R182-P91 User Manual Download Page 71

Page: 71 / 96

- 71 -

BIOS Setup

5-2-16

MAC IPv4 Network Configuration

(Note) This item appears when

Configured

is set to

Enabled

Parameter

Description

Configured

Indicates whether network address is configured successfully or not.

Options available: Enabled, Disabled. Default setting is

Disabled.

Enable DHCP

(Note)

Options available: Enabled, Disabled. Default setting is

Enabled.

Local IP Address

(Note)

Press [Enter] to configure local IP address.

Local NetMask

(Note)

Press [Enter] to configure local NetMask.

Local Gateway

(Note)

Press [Enter] to configure local Gateway

Local DNS Servers

(Note)

Press [Enter] to configure local DNS servers

Save Changes and Exit

Press [Enter] to save all configurations.

Summary of Contents for R182-P91

































































































Search results

Summary of Contents for R182-P91

Reviews:

Related manuals for R182-P91

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R182-P91, User Manual

Search results

Summary of Contents for R182-P91

Reviews:

Related manuals for R182-P91

Brands by name

Popular brands