GIGA-BYTE TECHNOLOGY MZ72-HB2, User Manual

Page: 57 / 124

- 57 -
BIOS Setup
2-2-17 Broadcom BCM57416 10GBASE-T Network Connection
Parameter Description
Firmware Image Menu
Press [Enter] to view firmware image information.
Device Configuration Menu
Press [Enter] to configure advanced items.
Š
Multi-Function Mode
– Configures the NIC Hardware Mode.
– Options available: SF, NPAR 1.0. Default setting is SF .
Š
Number of VFs Per PF
– Configures the number of Virtual Functions Per Physical Function in
multiples of 8 (1-128). This field is only applicable when SR-IOV is
enabled.
– Default setting is 8 .
Š
SR-IOV
– Enable/Disable Single Root I/O Virtualization.
– Options available: Enabled, Disabled. Default setting is Enabled .
Š
Number of MSI-X Vectors per VF
– Configures the number of MSI-X Vectors per VF (0-128).
– Default setting is 4 .
Š
Maximum Number of PF MSI-X Vectors
– Configures the maximum number of PF MSI-X Vectors (0-512 per
controller).
– Default setting is 74 .