GIGA-BYTE TECHNOLOGY MZ72-HB2, User Manual

Page: 115 / 124

- 115 -
BIOS Setup
2-6-3 BMC Network Configuration
Parameter Description
BMC network configuration
Lan Channel 1
Configuration Address source
Selects to configure LAN channel parameters statically or dynamically
(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.
Options available: Unspecified, Static, DynamicBmcDhcp. Default setting
is DynamicBmcDhcp .
Station IP address
Displays IP Address information.
Subnet mask
Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.
Router IP address
Displays the Router IP Address information.
Station MAC address
Displays the MAC Address information.
VLAN Support
Set BMC to enable/disable VLAN support.
Options available: Enabled, Disabled. Default setting is
Disabled .
Real-time synchronize BMC
network parameter values
Press [Enter] will set Address source(Static/DHCP) to BMC and then get
Station IP address, Subnet mask and Router IP address from BMC.