GIGA-BYTE TECHNOLOGY GIGABYTE GS-S12-P04R, User Manual

Page: 52 / 72

- 52 -
5-6 Server Mgmt
&
BMC Support
Enables or disables interfaces to communicate with BMC.
&
Wait For BMC
Allows you to determine whether to wait for BMC response for specified time out. In PILOTII, BMC starts
at the same time when BIOS starts during AC power ON. It takes around 30 seconds to initialize Host to
BMC interfaces.
&
FRB-2 Timer
Enables or disables FRB-2 Timer (POST timer).
&
FRB-2 Timer timeout
Allows you to set FRB-2 Timer Expiration from 3 to 6 minutes. This item is configurable only when FRB-2
Timer is set to Enabled .
&
FRB-2 Timer Policy
Configures how the system should respond if the FRB-2 Timer expires. This item is configurable only when
FRB-2 Timer is set to Enabled .
&
OS Watchdog Timer
Enabled starts a BIOS timer which can only be shut off by Management Software after the OS loads. Helps
determine that the OS successfully loaded or follows the OS Boot Watchdog Timer policy.
&
OS Wtd Timer Timeout
Configures the length of the OS Boot Watchdog Timer. Options are: 5 minutes, 10 minutes, 15 minutes,
and 20 minutes. This item is configurable only when OS Watchdog Timer is set to Enabled .
&
OS Wtd Timer Policy
Configures how the system should respond if the OS Boot Watchdog Timer expires. This item is configurable
only when OS Watchdog Timer is set to Enabled .
`
System Event Log
Press [Enter] to change the SEL event log configuration.
`
View FRU information
Press [Enter] to view FRU information.