GIGA-BYTE TECHNOLOGY GIGABYTE GS-S12-P04R, User Manual

Page: 17 / 72

Chapter 4 System Hardware Installation
Pre-installation Instructions
Computer components and electronic circuit boards can be damaged by discharges of
static electricity. Working on computers that are still connected to a power supply can
be extremely dangerous. Follow the simple guidelines below to avoid damage to your
computer or injury to yourself.
•
Always disconnect the computer from the power outlet whenever you are working
inside the computer case.
•
If possible, wear a grounded wrist strap when you are working inside the computer
case. Alternatively, discharge any static electricity by touching the bare metal system
of the computer case, or the bare metal body of any other grounded appliance.
•
Hold electronic circuit boards by the edges only. Do not touch the components on the
board unless it is necessary to do so. Do not flex or stress the circuit board.
•
Leave all components inside the static-proof packaging until you are ready to use the
component for the installation.
- 17 -