GIGA-BYTE TECHNOLOGY GA-H97M-D3H User Manual Download Page 7

Page: 7 / 40

- 7 -

1-2 Product Speciications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1150 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z97

/H97

Express Chipset

Memory

4 x DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1600/1333 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Proile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and

memory modules.)

Onboard
Graphics

Integrated Graphics Processor:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz or

2560x1600@60Hz

* Support for HDMI 1.4a version.

Support for up to 3 displays at the same time

Maximum shared memory of 1 GB

Audio

Realtek

ALC892 codec

High Deinition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Realtek

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

1 x PCI Express x16 slot, running at x4 (PCIEX4)

(The PCIEX4 slot conforms to PCI Express 2.0 standard.)

2 x PCI slots

Multi-Graphics
Technology

Support for 2-Way AMD CrossFire

™

technology

Storage Interface

Chipset:
-

6 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, RAID 5, and RAID 10

USB

Chipset:

- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

- 8 x USB 2.0/1.1 ports (2 ports on the back panel, 6 ports available through

the internal USB headers)

Only for GA-Z97M-D3H.

Only for GA-H97M-D3H.

Summary of Contents for GA-H97M-D3H









































Search results

Summary of Contents for GA-H97M-D3H

Reviews:

GIGA-BYTE TECHNOLOGY GA-H97M-D3H, User Manual, Page: 7 / 40

Search results

Summary of Contents for GA-H97M-D3H

Reviews: