manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY GA-AM1M-S2H, User Manual, Page: 25 / 32

Share
Download
GIGA-BYTE TECHNOLOGY GA-AM1M-S2H User Manual Download Page 25

- 25 -

 

`

GFX Configuration

 

&

Primary Video Device

 

Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard 

graphics.

 

IGD Video   

 

Sets the onboard graphics as the first display.

 

NB PCIe Slot Video   Sets the PCI Express graphics card on the PCI Express slot controlled by the 

North Bridge as the first display. (Default)

 

&

Integrated Graphics

 

Enables or disables the onboard graphics function.

 

Auto   

 

 

 The BIOS will automatically enable or disable the onboard graphics depending on 

the graphics card being installed. (Default)

 

Disabled   

 

Disables the onboard graphics.

 

Force  

 

 

 Always activates the onboard graphics, whether or not a PCI Express card is 

installed.

 

&

Gnb HD Audio

 

TEnables or disables the onboard HDMI audio function. (Default: Enabled)

 

`

SATA Configuration

 

&

OnChip SATA Channel

 

Enables or disables the integrated SATA controllers. (Default: Enabled)

 

&

OnChip SATA Type

 

Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode.

 

IDE   

 

 

Configures the SATA controller to IDE mode.

 

AHCI   

 

 

 Configures the SATA controller to AHCI mode. Advanced Host Controller Interface 

(AHCI) is an interface specification that allows the storage driver to enable 

advanced Serial ATA features such as Native Command Queuing and hot plug. 

(Default)

 

&

PORT0 Hot Plug~PORT1 Hot Plug

 

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

 

&

SATA Power on PORT0~SATA Power on PORT1

 

Enables or disables each SATA port. (Default: Enabled)

 

`

Super IO Configuration

 

 This section provides information on the super I/O chip and allows you to configure the serial port and 

parallel port.

 

&

Serial Port A

 

Enables or disables the onboard serial port. (Default: Enabled)

 

&

Parallel Port

 

Enables or disables the onboard parallel port. (Default: Enabled)

 

&

Device Mode

 

This item is configurable only when 

Parallel Port

 is set to 

Enabled

. Selects an operating mode for the 

onboard parallel (LPT) port. Options are: Standard Parallel Port Mode (Default), EPP Mode (Enhanced 

Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode.

Summary of Contents for GA-AM1M-S2H

































Reviews:

No comments