GIGA-BYTE TECHNOLOGY G481-HA1 Service Manual Download Page 37

Page: 37 / 124

- 37 -

System Hardware Installation

3-7-6 Intel Optane DCPMM DIMM Population Rule

Thermal conditions for DCPMM DIMM support:

•

The ambient temperature must be at or below 35°C

•

The Cascade Lake CPU used must have a maximum TDP of 205W

•

A maximum of 12 pcs 256G DCPMM may be installed

• RDIMM / DCPMM must be installed into CPU0 memory first
•

You must install one RDIMM into any slot #0 of CPU0 before installing the DCPMM.
(e.g. A0/B0/C0/D0/E0/F0)

•

The DCPMM must be installed into the DIMM slot #1 next to the corresponding RDIMM
in slot #0 (e.g. if RDIMM is installed into DIMM slot A0, the DCPMM must be installed into
DIMM slot A1)

DIMM_P0_D0/RDIMM Slot

DIMM_P0_D1/Intel Optane DCPMM Slot

DIMM_P0_E0/RDIMM Slot

DIMM_P0_E1/Intel Optane DCPMM Slot

DIMM_P0_F0/RDIMM Slot

DIMM_P0_F1/Intel Optane DCPMM Slot

DIMM_P1_L0/RDIMM Slot

DIMM_P1_L1/Intel Optane DCPMM Slot

DIMM_P1_K0/RDIMM Slot

DIMM_P1_K1/Intel Optane DCPMM Slot

DIMM_P1_J0/RDIMM Slot

DIMM_P1_J1/Intel Optane DCPMM Slot

DIMM_P1_G1/Intel Optane DCPMM Slot

DIMM_P1_G0/RDIMM Slot

DIMM_P1_H1/Intel Optane DCPMM Slot

DIMM_P1_H0/RDIMM Slot

DIMM_P1_I1/Intel Optane DCPMM Slot

DIMM_P1_I0/RDIMM Slot

DIMM_P0_C1/Intel Optane DCPMM Slot

DIMM_P0_C0/RDIMM Slot

DIMM_P0_B1/Intel Optane DCPMM Slot

DIMM_P0_B0/RDIMM Slot

DIMM_P0_A1/Intel Optane DCPMM Slot

DIMM_P0_A0/RDIMM Slot

&38

3ULPDU\

&38

6HFRQGDU\

Summary of Contents for G481-HA1





























































































































Search results

Summary of Contents for G481-HA1

Reviews:

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G481-HA1, Service Manual

Search results

Summary of Contents for G481-HA1

Reviews:

Brands by name

Popular brands