GIGA-BYTE TECHNOLOGY G262-ZR0 User Manual Download

Page: 104 / 137

BIOS Setup

- 104 -

5-3-4 NBIO Common Options

Parameter

Description

NBIO Common Options

IOMMU

Enable/Disable the IOMMU function.
Options available: Enabled/Disabled. Default setting is

Disabled

DMAr Support

Enable DMAr system protection during POST.
Options available: Auto,Enabled/Disabled. Default setting is

Auto

PCIe ARI Support

Enable/Disable Alternative Routng-ID Interpretation.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

PCIe ARI Enumeration

ARI Forwarding Enable for each downstream port.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

PCIe Ten Bit Tag Support

Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Auto, Enabled, Disabled. Default setting is

Auto

SMU Common Options

Press [Enter] for configuration of advanced items.

NBIO RAS Common
Options

Press [Enter] for configuration of advanced items.

Enable AER Cap

Enable/Disable Advanced Error Reporting Capability.
Options available: Auto, Enabled, Disabled. Default setting is

Auto

Early Link Speed

Configures Early Link Speed.

Options available: Auto, Gen1, Gen2. Default setting is

Auto

Summary of Contents for G262-ZR0










































































































































Search results

Summary of Contents for G262-ZR0

Reviews:

Related manuals for G262-ZR0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G262-ZR0, User Manual

Search results

Summary of Contents for G262-ZR0

Reviews:

Related manuals for G262-ZR0

Brands by name

Popular brands