2
G
. 1
0.
03
.0
9
Contents
1. Safety instructions
Please observe the technical regulations as well as the building authorities and legal stipulations when set-
ting-up and operating the system.
The installation, oil and exhaust gas connection, initial commissioning, power connection as well as mainte-
nance and servicing must only be carried out by a specialist.
The VDE and ÖVE regulations and the specifications of the responsible energy supply company must be
taken into account when preparing the electrical connections.
Work may only be carried out on equipment by a specialist in accordance with the valid VDE and ÖVE regu-
lations.
2. Maintenance
The system must be serviced regularly in accordance with §9 of the Heating Installations Ordinance, in order
to ensure a reliable and safe functioning of the device.
One maintenance must be carried out annually. We recommend that you draw up a maintenance contract
with an approved specialist company.
3. Declaration of conformity
We affirm that the Giersch GL10 fan-assisted oil burner fulfils the basic requirements
of the following directives:
• "Low voltage directives" in accordance with 73/23/ EWG in connection with DIN VDE 0700 part 1/
issued 04.88 and DIN VDE 0722/issued 04.83
• "Electromagnetic compatibility" in accordance with directive 89/336/ EWG in connection with
EN 55014/ issued 04.93 and EN 50082-1/issued 01.92
• "Machine directives" in accordance with directive 98/37/ EG
• "Efficiency directive" in accordance with directive 92/42/EWG in connection with DIN EN 267/issued 10.91
1.
Safety instructions ........................................................................................................................ 2
2.
Maintenance ................................................................................................................................. 2
3.
Declaration of conformity ..............................................................................................................2
4.
Technical specifications................................................................................................................3
5.
Installing flange and burner ..........................................................................................................3
6.
Electrical connection.....................................................................................................................3
7.
Oil pump ....................................................................................................................................... 4
8.
Oil connection ............................................................................................................................... 5
9.
Service position ............................................................................................................................ 6
10.
Nozzle replacement ...................................................................................................................... 6
11.
Setting the ignition electrodes....................................................................................................... 6
12.
Setting the air volume (measure "A")............................................................................................ 6
13.
Position snap ring / nozzle tube.................................................................................................... 7
14.
Functional control .........................................................................................................................8
15.
Oil preheating unit.........................................................................................................................9
16.
Oil control (Option)........................................................................................................................ 9
17.
Calibration of the boiler-burner ...................................................................................................11
18.
Flue connection .......................................................................................................................... 11
19.
Exhaust gas thermometer........................................................................................................... 11
20.
Circuit diagram............................................................................................................................ 12
21.
Troubleshooting .......................................................................................................................... 14
22.
Adjustment table .........................................................................................................................15
23.
Exploded diagram and spare parts list ....................................................................................... 17
24.
Burner dimensions / boiler connection dimensions ....................................................................20
25.
Work ranges ............................................................................................................................... 20