Giant MY20, Service Manual

Page: 55 / 106

55
4.3 RIDECONTROL - REMOTE & DISPLAY
EVO DISPLAY & BRACKET (CITY TYPE)
DISASSEMBLE:
1
Locate the display cable at the cable exit hole in the frame, and take out
the connectors. Remove any cable binders or tie-wraps if needed. Please
note that other cables can obstruct the exit hole. Try to avoid using too
much force while pulling out the connector to prevent damage to the cable.
2
When the connector is pulled completely out of the frame, disconnect the
displaywire connector from the mainwire connector.
3
3Disconnect the second displaywire connector from the remotewire con-
nector.
4
Remove the 4 screws on the bottom of the display bracket.
5
To remove the display bracket, first remove the handlebar clamp.