8
3. Torque settings
The bolts used to attach the rear suspension unit are very high grade products factory installed to
specific torque specification. If it becomes necessary to remove or tighten the pivot bolts extreme care
should be taken when re-tightening them.
All bolts should be cleaned and re-set using LocTite Primer (
﹟
243)
All bolts location and tighten torque please refer to the illustration below.
6
2
3
5
1
4
Torque settings:
1.
Main pivot
120 -150 Kgf/cm. or 104 -130 in-lbs.
2.
Seatstay pivot
120 -150 Kgf/cm. or 104 -130 in-lbs.
3.
Main linkage pivot
90 -110 Kgf/cm. or 78 - 95 in-lbs.
4.
Upper shock mount
90 -110 Kgf/cm. or 78 - 95 in-lbs.
5.
Lower shock mount
90 -110 Kgf/cm. or 78 - 95 in-lbs.
6.
Chainstay pivot
120 -150 Kgf/cm. or 104 -130 in-lbs.
