Glass Mount Installation
Frameless Glass Wall
Spacer
Copyright All Rights Reserved. P-MU-ML-400 Published: 2020.12.07
Set Screws
Set Screws
Frameless Glass Door (10 to 13 mm thick)
Spacer
1.It is suggested to attach the spacer to inside of the door.
2.Tighten the set screws lightly to prevent breaking the glass.
3.The glass thickness should be 10~13 mm. The bracket can be adjusted to properly align the position of strike plate and lock body depending on the door
gap ranging from 6 to 10 mm.
1.Make sure the installation location and clean the surface of glass.
2.Take off the sticker on the back of the spacer and attach the spacer to glass. Add more spacers if needed according to glass thickness. Use silicon to
secure the bracket firmly.
3.Tighten the set screws with the Allen wrench, secure the electric lock to the glass bracket, and then install the cover.
