Electromagnetic Lock
(Indoor Series)
Installation Instruction
Optional Bracket
Regular Installation
L-bracket for narrow
frame (optional)
U-bracket for frameless
glass door (optional)
LZ-bracket for inswing
door (optional)
Bracket installation is according to door swing direction and door frame type ,e. g. narrow frame door , frameless glass door, inswing door , etc.
Regular Installation
1
2
3
4
Tem pl ate
Fold the mounting template 90
°
Place the template to the proper
position of the door and frame. Mark
the hole positions of the template on
the door and frame.
Drill the holes according to the
marks.
Please install the armature plate as
illustrated herr. (Dimensions of the
holes are depending on the door
types as illustrated below)
Armature Plate
Fix the mounting plate on the door
with mounting screws
Use the Allen wrench and fixing bolts
to tighten the electromagnetic lock to
mounting plate.
Allen wrench
9
Connect the power and test the unit.
Outswing
Power
D r i l l a Ø 8 m m h o l e
through door, on closing
s i d e , e n l a r g e t o
Ø12.7mm by a sexnut
bolt on the opening side.
12.7mm
8mm
Hollow Metal Door
6.8mm for M8-1.25 thread
Reinforced Door
12.7mm 8mm
Solid Door
36mm
5
Rubber Washer
(outswing door)
Copyright © Gianni Industries, Inc. All rights reserved.
P-MU-AM-EM-GEM Ver. B Published on: 2011.04.07
6
7
7
8
Outdoor
Outdoor
Outdoor
Recommendation:
For Micro EM-locks (300 LBS), maximum thickness of door is 44 mm.
For Mini EM-locks (600 LBS), maximum thickness of door is 50 mm.
For Midi EM-locks (800 LBS), maximum thickness of door is 48 mm.
For Maxi EM-locks (1200 LBS), maximum thickness of door is 46 mm.
Drill a Ø8mm hole thrugh
d o o r o n c l o s i n g s i d e
enlarge to Ø 12.7mm, by a
sexnut blot on the opening
side. The depth is 36mm.
Drill a
and tap on closing side
a M8x12.5 thread.
Ø6.8mm hole
T h e r u b b e r w a s h e r m a k e s t h e
s u r f a c e o f t h e a r m a t u r e p l a t e
adjustable in order to completely fit
the surface of magnetic lock.
Fasten the mounting plate with the
mounting screws. The position of the
mounting plate should be adjustable.
