Installation Steps --Out-swing door( Right-Hand Open )
Step Figures
Description
Step 1.
Place the AD425S template to the right position on
the door header. See the figure presented for an
out-swing door (Right-Hand Open), more details
shown in
P. 11 Figure 17
Step 2.
Mark for pilot holes.
(
Use the center pointer)
Step 3.
Mark six pilot holes, one cable hole and center line.
Step 4.
Drill a pilot hole.
Step 5.
Drill six ø 9.5mm pilot holes and one ø 18mm cable
hole.
Step 6.
Tap and insert a Blind Nut.
Automatic Door Operator
Manual
12
